How to make working cameras in Gimkit! (Difficulty

For over a year, Gimkit users have been itching to make cameras since Gimkit Creative’s
release date on May 10, 2023. Well, here it is!! The tutorial on how to make cameras in Gimkit!

Here’s what you need: 3 Camera Views, 3 Buttons, 3 Teleporters, a trigger, a text, and 2 types of blocks of your choice (I used dark scraps and concrete in this situation).

Part 1 (Loading Screen): Get 1 Camera View, 1 Button, 1 Teleporter,
a text, and a trigger, and arrange them like in the following image (I would recommend building around the edges like I did. Also, only the inner 4 blocks is floor, the rest is wall):

image638×642 81.9 KB

I just stuffed everything in one spot except for the text which is below so the player can see that they are on a loading screen. The button is used to get into the camera system, basically a power button. Set the trigger delay to 2-5 seconds, to make the illusion of loading like on old-fashioned computers.
Now everyone’s favorite part: WIRING!! Just wire it like in the following image:

image1316×251 33.7 KB

If you are having trouble with wiring, here is a clear image to help you:

I wired the button with the teleporter even though it’s hidden behind the trigger.
Anyway, that’s it for part 1! Let’s get started with part 2!!

Part 2 (Actual camera selection screen): Get 1 Camera View, 2 Teleporters, and 2 buttons and arrange it like so (In this all of the dark scraps are floor, and only
the concrete is wall so you can put more cameras if you’d like):

image636×702 98.4 KB

Now wire like in the following image (This WILL also connect part 1 to this part):

image1315×251 34.5 KB

image1319×254 36.8 KB

If you are having trouble with wiring here are clear images of what I wired:

image702×318 80.2 KB

I wired the trigger and teleporter together.

For this, I wired a button (used to get out of cameras) to a teleporter.
Anyway, let’s get onto the moment you’ve all been waiting for, the easiest part (AKA cameras)!

Part 3 (Actual Camera!!): Get 1 Camera View, 1 Button, and a teleporter and arrange like so:

image628×595 107 KB

Now wire part 2 with this part, here’s an image to help:

image1315×252 35.3 KB

If you are still stuck with wiring, then here’s an image to help:

image959×442 101 KB

Another picture of wiring:

image1316×253 36.4 KB

Another picture to help with wiring:

image1151×446 124 KB

I wired the button with the teleporter.
And that is everything! Hope you guys enjoyed the tutorial! Please like this as this took a long time. DuhDinoKing2099, signing out (I don’t know why I do this, I just like it I guess)!

(责任编辑：)

搜索

热门标签:

How to make working cameras in Gimkit! (Difficulty